« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: Stick it out with AMD, or change to Intel?  (Read 466 times)

0 Members and 2 Guests are viewing this topic.

Offline Hartsblade}12th VR{

  • Alphatester
  • Lance Captain
  • *
  • Posts: 643
  • Karma: 25
Re: Stick it out with AMD, or change to Intel?
« Reply #30 on: January 19, 2012, 02:47:18 PM »
Quote from: =CJW= Bin Fish on January 18, 2012, 10:02:04 AM
3.8 was the highest i could get my 1055t to on the 790 chipset.

What volts are you at for 3.7 and how hot is it getting during a run of blend test in prime95?

Sorry it took so long to update again Bin...

At stock voltages (VCore 1.41 volts), air cooled:
Idle avg ~35-37 degrees
Prime 95 blend avg ~50 degrees, peak at 55 degrees

edit: typo
« Last Edit: January 19, 2012, 03:25:58 PM by Hartsblade}12th VR{ »
Logged

Offline =CJW= Bin Fish

  • MechWarrior
  • **
  • Posts: 343
  • Karma: 17
  • Gimme a Bloodkite!
Re: Stick it out with AMD, or change to Intel?
« Reply #31 on: January 19, 2012, 06:37:43 PM »
That does not look like a stock voltage. Is the vcore set to auto in BIOS?
Logged
Quote from: (TLL)KitLightning on October 02, 2011, 10:34:32 PM
lol no Bin Fish, cane mala, non biscoctus :P

Offline Hartsblade}12th VR{

  • Alphatester
  • Lance Captain
  • *
  • Posts: 643
  • Karma: 25
Re: Stick it out with AMD, or change to Intel?
« Reply #32 on: January 19, 2012, 08:10:22 PM »
Quote from: =CJW= Bin Fish on January 19, 2012, 06:37:43 PM
That does not look like a stock voltage. Is the vcore set to auto in BIOS?

everything I've read says stock voltage is 1.40.  The 1.41 I posted was what was reported by CPUID (volts were back and forth between 1.40 and 1.41). CPU-Z reports voltage at 1.40.

Can't remember is vcore is set to auto in the BIOS...I'll check next time I reboot  ;)
Logged
Pages: 1 2 [3]   Go Up
« previous next »